The GST DJ-2600 HVOF Spray Gun is a machine-mounted gas-fuel High-Velocity Oxygen Fuel (HVOF) torch designed for dense, high-integrity coatings from metals, alloys, superalloys, carbides and cermets. The gun is intended for industrial coating processes where high particle velocity, low oxide pickup and repeatable coating quality are required.
The GST DJ-2600 HVOF Spray Gun is a machine-mounted gas-fuel High-Velocity Oxygen Fuel (HVOF) torch designed for dense, high-integrity coatings from metals, alloys, superalloys, carbides and cermets. The gun is intended for industrial coating processes where high particle velocity, low oxide pickup and repeatable coating quality are required.
The DJ-2600 process uses hydrogen as the fuel gas together with oxygen and compressed air. Combustion gases are accelerated through a converging-diverging nozzle to supersonic velocity, while the powder is injected axially into the center of the high-velocity gas stream. This arrangement promotes efficient particle heating and acceleration and helps limit coating-material buildup in the extended air cap.
The gun is widely suited to wear- and corrosion-resistant coatings based on WC-Co, WC-CoCr, Cr3C2-NiCr, nickel alloys, stainless steels and other HVOF feedstocks. Properly optimized DJ-2600 processes can produce dense coatings with low oxide content, fine homogeneous microstructures and high bond strength while retaining good machinability for post-spray finishing.
The GST DJ-2600 is designed for automated operation and can be integrated with industrial robots, manipulators, lathes and complete GST HVOF coating cells. Process parameters, powder feed, component motion and cooling are selected according to the coating material, component geometry and required coating properties.
Key benefits
- Gas-fuel HVOF design using hydrogen and oxygen for clean, high-velocity coating deposition.
- Axial powder injection places feedstock in the center of the gas stream for uniform heating and acceleration.
- Hybrid water and compressed-air cooling supports stable operation during industrial spray cycles.
- Dense, low-oxide coatings with high bond strength when operated with qualified materials and parameters.
- Suitable for carbide, cermet, metal, alloy and superalloy coating materials.
- Extended air-cap concept helps reduce material buildup and maintain a consistent spray pattern.
- Machine-mounted construction supports integration with robots, manipulators and automated coating cells.
- Compatible with GST gas-fuel HVOF systems and process-control architectures for turnkey integration.
Optional Accessories and Consumables
The GST DJ-2600 HVOF Spray Gun can be configured with interchangeable process hardware, wear parts and maintenance accessories according to the selected powder, coating specification and production duty.
- Hybrid / extended air-cap assemblies
- Combustion nozzles and nozzle inserts
- Axial powder injectors and powder-feed hardware
- Gas injector and combustion hardware
- Water-cooling components and seals
- Gun mounting fixtures and robotic brackets
- HVOF hose and connection sets
- Gun-mounted component-cooling air jets
- Replacement O-rings, seals and maintenance parts
GST can supply DJ-2600-compatible consumables and replacement parts and can select the required hardware for a specific coating material. Final gas flows, injector configuration, air-cap geometry and cooling arrangement should be confirmed during process qualification.
Applications
The GST DJ-2600 HVOF Spray Gun is intended for high-performance wear, corrosion and restoration coatings in automated industrial applications, including:
- WC-Co and WC-CoCr wear-resistant coatings on shafts, hydraulic rods and landing-gear components.
- Cr3C2-NiCr coatings for elevated-temperature wear and corrosion protection.
- Nickel- and cobalt-based alloy coatings for corrosion and oxidation resistance.
- Hard-chrome replacement coatings on fatigue-sensitive aerospace and industrial components.
- Pump shafts, seals, sleeves and valve components in oil, gas and process industries.
- Wear-resistant coatings on rolls, plungers, mandrels and heavy-machinery components.
- Bond coats and metallic layers for multilayer thermal spray systems.
- Dimensional restoration of worn or undersized machine components.
FAQ
What is the GST DJ-2600 HVOF Spray Gun used for?
The DJ-2600 is used to apply dense wear-resistant, corrosion-resistant and restoration coatings from carbides, cermets, metals and alloys. Typical applications include shafts, hydraulic rods, landing gear, valves, pump components and industrial wear parts.
Which fuel does the DJ-2600 use?
The GST DJ-2600 is configured as a gas-fuel HVOF gun using hydrogen as the fuel and oxygen as the oxidizer. Compressed air is also used in the process and cooling arrangement.
How is powder introduced into the DJ-2600 flame?
Powder is injected axially into the center of the high-velocity gas stream. Axial injection promotes uniform particle heating and acceleration and helps reduce buildup on the air-cap walls.
What coating materials can be sprayed with the DJ-2600?
The gun can process metals, alloys, superalloys, carbides and cermets. Common HVOF materials include WC-Co, WC-CoCr, Cr3C2-NiCr and nickel-based alloys.
Is the DJ-2600 suitable for carbide coatings?
Yes. Carbide and cermet coatings are among the main applications of the DJ-2600. Final powder size, feed rate, gas flows and spray distance are selected according to the coating specification.
How is the DJ-2600 cooled?
The Diamond Jet 2600 architecture uses a hybrid cooling arrangement combining water cooling with compressed air. Component cooling air can also be added to control substrate temperature during spraying.
Can the DJ-2600 be used as an alternative to hard chrome?
HVOF carbide coatings applied with DJ-2600-type equipment are widely used in qualified hard-chrome replacement applications, particularly where high wear resistance and low porosity are required. Suitability must be confirmed against the applicable component specification.
How do I select the DJ-2600 process hardware and parameters?
Selection depends on powder chemistry and particle size, coating thickness, component geometry and required properties. GST can select the gun hardware and develop the process parameters from the coating specification and component drawing.
|
Cooling
|
Hybrid water / compressed-air cooling |
|
Oxidizer
|
Oxygen (O2) |
|
Fuel gas
|
Hydrogen (H2) |
|
Powder carrier gas
|
Nitrogen (typical; selected according to the process) |
|
Gun type
|
Machine-mounted gas-fuel HVOF spray gun |
|
Installation
|
Automated / robotic / machine-mounted HVOF systems |
|
Auxiliary process gas
|
Compressed air |
|
Powder injection
|
Axial injection into the high-velocity gas stream |
|
Sprayable materials
|
Metals, alloys, superalloys, carbides and cermets |
|
Nozzle principle
|
Converging-diverging supersonic nozzle with extended air cap |
|
Powder feed rate
|
Application-specific; selected for powder and coating specification |
|
Typical carbide systems
|
WC-Co, WC-CoCr, Cr3C2-NiCr and related HVOF materials |
|
Powder particle size
|
Application-specific; matched to gun hardware and spray parameters |
|
Coating characteristics
|
High density, low oxide content, fine microstructure and high bond strength |
|
Spray orientation
|
Straight external-surface spray configuration |
|
Component cooling
|
External compressed-air cooling can be integrated as required |
|
Primary applications
|
Wear protection, corrosion protection, dimensional restoration and hard-chrome replacement |
|
Compatible system
|
GST MP 3000 HVOF and engineered gas-fuel HVOF coating cells |
|
Process setup
|
Gas flows, spray distance and powder feed are qualified for each coating material |
|
Process
|
High-Velocity Oxygen Fuel - gas fuel (HVOF-GF) |
To purchase a product you like, you need to order it. There are several scenarios for how this can be done.
Choose the product you like and click the "Book now" button. When placing an order, fill out the form. Enter information in the fields: full name, phone number and e-mail. Then the manager will send you e-mail to confirm your consent to make the purchase.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We work with legal entities. And we provide few payment options.
We work on Standard purchasing Contract basis. Payment type depends on product and final customer country/address.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We can deliver your ordered goods with recommended logistic companies on EXW/DDP basis. Delivery time depends on final customer country/address. Terms and conditions can be found in invoice/offer.
Ready to delivery lead time is longer for customized equipment/systems.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.

