The GST F1-45 Plasma Gun is a machine-mounted Atmospheric Plasma Spray (APS) gun designed specifically for coating internal surfaces. Its compact gun head and 45° plasma jet orientation allow the spray stream to reach internal areas where a conventional straight plasma gun cannot maintain the required spray angle or stand-off distance.
The GST F1-45 Plasma Gun is a machine-mounted Atmospheric Plasma Spray (APS) gun designed specifically for coating internal surfaces. Its compact gun head and 45° plasma jet orientation allow the spray stream to reach internal areas where a conventional straight plasma gun cannot maintain the required spray angle or stand-off distance.
The F1 platform is intended for internal diameters of 75 mm (3 in) or greater and operates at power levels up to 25 kW in continuous duty. The 45° configuration is particularly useful for internal bores, cavities, shoulders and transition areas where an angled spray path provides better access to the target surface.
A tungsten-lined nozzle provides long service life, while the powder injector arrangement is designed to maintain repeatable injection angle and distance. The gun supports a wide range of plasma-spray powders and can operate with argon, hydrogen, nitrogen and helium process gases, depending on the selected coating process.
The electrically inert gun-head construction helps reduce the risk of electrical shorting if the gun head contacts a metallic component. The F1-45 can be integrated into automated and robotic thermal spray systems, including GST MP 3000 APS installations, for repeatable coating of internal surfaces.
Key benefits
- 45° plasma jet orientation designed for internal-surface coating and angled access inside bores and cavities.
- Suitable for internal diameters from 75 mm (3 in), allowing coating of relatively small bores and housings.
- Up to 25 kW continuous operating power for stable industrial APS coating processes.
- Compact gun head design improves access inside components and reduces space requirements around the spray zone.
- Tungsten-lined nozzle provides long service life and helps reduce consumable replacement frequency.
- Well-positioned powder injectors support repeatable powder entry into the plasma jet and stable coating results.
- Electrically inert gun-head construction helps prevent shorting if the gun head contacts metallic components.
- Machine-mounted design supports integration with robots, manipulators and automated internal-coating systems.
Optional Accessories and Consumables
The GST F1-45 Plasma Gun can be configured with interchangeable wear parts, powder-injection components and maintenance accessories according to the coating material and internal-surface geometry.
- Nozzle pulling tool
- Gun mounting fixture
- Injector holders
- Powder injectors, 1.5 / 1.8 / 2.0 mm
- Plug-type electrode and electrode screw
- Plasma nozzles, 5 / 6 / 7 mm
- Gas distribution ring
- Replacement O-rings and seals
- Gun body, front and intermediate sections
GST offers F1-45 replacement components and consumables for routine maintenance and process configuration. Injector size, nozzle diameter and gun length should be selected according to the powder, coating specification and geometry of the component.
| No. | Article | Name | OEM Article No. | OEM Article No. |
|---|---|---|---|---|
| 1 | ST1003750 | Rear section complete | 1003750 | 301.012-01 |
| 1 | GST-00106151 | Rear section complete | - | - |
| 1 | GST-00106152 | Rear section complete | - | - |
| 1 | GST-00106153 | Rear section complete | - | - |
| 1 | GST-00106154 | Rear section complete | - | - |
| 2 | ST1003749 | Front section | 1003749 | 301.015-01 |
| 2 | GST-00106156 | Front section | - | - |
| 2 | GST-00106157 | Front section | - | - |
| 2 | GST-00106158 | Front section | - | - |
| 2 | GST-00106159 | Front section | - | - |
| 3 | ST1003629a | Shell for F1 | 1003629 | 301.001-01 |
| 4 | ST1003629b | Shell for F1 | 1003629 | 301.001-01 |
| 5 | ST1003754 | Intermediate section complete | 1003754 | 301.014-00 |
| 6 | ST1003634 | Gas distribution ring | 1003634 | 301.013 |
| 7 | ST1003636 | Injector support standard | 1003636 | 301.022 |
| 8 | ST1003640 | Centering pin | 1003640 | 3001.009 |
| 9 | ST1003624 | Insulating sleeves and covers | 1003624 | 301.007 |
| 10 | GST-00106065 | F1 Insulating insert | - | - |
| 11 | GST-00106066 | F1 Insulator cap | - | - |
| 12 | ST1003751 | Cover | 1003751 | 301.002-01 |
| 13-14 | GST-00106170 | F1-45-495 assembly top and bottom shell | - | - |
| 13-14 | GST-00106171 | F1-45-600 assembly top and bottom shell | - | - |
| 13-14 | GST-00106172 | F1-45-700 assembly top and bottom shell | - | - |
| 13-14 | GST-00106173 | F1-45-750 assembly top and bottom shell | - | - |
| 13-14 | GST-00106174 | F1-45-1000 assembly top and bottom shell | - | - |
| 15 | ST1003633a | Holder | 1003633 | 301.006 |
| 16 | ST1003633b | Holder | 1003633 | 301.006 |
| 17 | - | Bolt washer | - | - |
| 18 | - | Socket head cap screw for holder | - | 301.029 |
| 19 | - | Socket head cap screw | - | - |
| 20 | ST1003521 | Nozzle screws, M3x10 | 1003521 | 301.023 |
| 21 | - | Nozzle screws, M3x10 | - | - |
| 22 | - | Socket head cap screw | - | 301.028 |
| 23 | - | Socket head cap screw | - | - |
| 24 | - | Screws, M3x6 | - | 301.003 |
| 25 | - | Locknut, M5 | - | 301.021 |
| 26 | ST1003621 | Nozzle, 5 mm | 1003621 | 301.018 |
| 26 | ST1003743 | Nozzle, 6 mm | 1003743 | 301.019 |
| 27 | ST1003742 | Electrode, plug type | 1003742 | 301.010-01 |
| 27 | ST1003747 | Screw for electrode | 1003747 | 301.011 |
| 28 | ST1003758 | Powder injector 1.5 mm | 1003758 | 380.004 |
| 28 | ST1003760 | Powder injector 1.8 mm | 1003760 | 380.005 |
| 28 | ST1003761 | Powder injector 2.0 mm | 1003761 | 380.006 |
| 29 | ST1003754a | Intermediate section complete | 1003754 | 301.014-00 |
| 30 | ST1003626 | O-Ring, 19 x 1.5 mm | 1003626 | 301.017 |
| 31 | ST1003754b | Intermediate section complete | 1003754 | 301.014-00 |
| 32 | ST1003745 | O-Ring, 18 x 2 mm | 1003745 | 301.016 |
| 33 | ST1003510 | Connecting hose | 1003510 | 301.005 |
| 34 | ST1003509 | Connecting hose clamp | 1003509 | 301.004 |
Applications
The GST F1-45 Plasma Gun is intended for plasma spraying of functional and protective coatings on internal surfaces where an angled spray direction provides the required access, including:
- Internal surfaces of cylindrical bores, sleeves and housings.
- Internal shoulders, transitions and recessed areas requiring angled spray access.
- Wear-resistant coatings on internal machine-component surfaces.
- Corrosion-resistant coatings inside process and mechanical components.
- Ceramic and thermal-protection coatings on accessible internal surfaces.
- Bond coats and multilayer coating systems inside bores and cavities.
- Dimensional restoration of worn or oversized internal diameters.
- Automated coating of internal features in aerospace, energy and general industrial components.
FAQ
What is the GST F1-45 Plasma Gun used for?
The GST F1-45 is designed for atmospheric plasma spraying of internal surfaces. The 45° plasma jet is useful for bores, cavities, shoulders and transition areas where an angled spray path is required.
What is the minimum internal diameter for the F1-45?
The F1 platform is designed for internal surfaces with a diameter of 75 mm (3 in) or greater, provided that the component geometry allows the required gun clearance and spray distance.
What is the difference between the F1-45 and F1-90?
Both guns use the same F1 internal-diameter platform. The F1-45 directs the plasma jet at 45° relative to the gun body, while the F1-90 directs the jet at 90°. The preferred version depends on component geometry and the required spray direction.
What is the maximum power of the F1-45 Plasma Gun?
The F1-45 is designed for continuous operation at power levels up to 25 kW.
Which plasma gases can be used with the F1-45?
The F1 platform can use argon, hydrogen, nitrogen and helium as process gases, depending on the selected plasma parameters and coating material.
How is powder introduced into the F1-45 plasma jet?
Powder is introduced through external powder injectors. Injector diameter, position and orientation are selected according to powder properties and the required coating process.
What gun lengths are available?
Standard F1 configurations are available in 450 mm and 600 mm lengths. Other lengths can be supplied upon request for specific internal-coating applications.
How do I choose between the F1-45 and F1-90?
Selection is based on the bore geometry, spray distance, access to the coating area and required angle between the plasma jet and the substrate. GST can recommend the appropriate configuration from the component drawing and coating specification.
|
Duty cycle at rated power
|
100% / continuous operation |
|
Gun type
|
Machine-mounted internal-diameter plasma spray gun |
|
Maximum power
|
25 kW |
|
Powder feed
|
External powder injection |
|
Nozzle diameter
|
5 / 6 / 7 mm |
|
Cooling medium
|
Water |
|
Powder injector diameter
|
1.5 / 1.8 / 2.0 mm |
|
Cooling water inlet temperature
|
15-25 °C |
|
Cooling water pressure
|
12-13.5 bar |
|
Cooling water conductivity
|
< 10 µS/cm |
|
Cooling water flow
|
15-17 l/min |
|
Gun weight
|
Approx. 2.8 kg |
|
Installation
|
Automated / robotic / machine-mounted APS systems |
|
Primary application
|
Coating internal surfaces of bores and cavities |
|
Minimum bore ID
|
75 mm (3 in) |
|
Spray angle
|
45° relative to the plasma gun body axis |
|
Other gun lengths
|
Available upon request |
|
Standard gun length
|
450 / 600 / 700 mm |
|
Gun head construction
|
Electrically inert / insulated design for internal-surface spraying |
|
Process
|
Atmospheric Plasma Spray (APS) |
|
Plasma gases
|
Argon (Ar), Hydrogen (H2), Nitrogen (N2), Helium (He) |
To purchase a product you like, you need to order it. There are several scenarios for how this can be done.
Choose the product you like and click the "Book now" button. When placing an order, fill out the form. Enter information in the fields: full name, phone number and e-mail. Then the manager will send you e-mail to confirm your consent to make the purchase.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We work with legal entities. And we provide few payment options.
We work on Standard purchasing Contract basis. Payment type depends on product and final customer country/address.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We can deliver your ordered goods with recommended logistic companies on EXW/DDP basis. Delivery time depends on final customer country/address. Terms and conditions can be found in invoice/offer.
Ready to delivery lead time is longer for customized equipment/systems.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.


