The GST F4MBXL Plasma Gun is a versatile machine-mounted plasma spray gun designed for Atmospheric Plasma Spray (APS) applications. It is intended for industrial coating processes requiring stable operation, repeatable spray parameters and integration into automated or robotic thermal spray systems.
The GST F4MBXL Plasma Gun is a versatile machine-mounted plasma spray gun designed for Atmospheric Plasma Spray (APS) applications. It is intended for industrial coating processes requiring stable operation, repeatable spray parameters and integration into automated or robotic thermal spray systems.
The F4MBXL can be used to deposit a broad range of coating materials, including metals, metallic alloys, oxide ceramics, carbides, cermets, composite materials, abradables and blended powders. Its straight spray configuration makes the gun particularly suitable for external surfaces, shafts, discs, turbine components and other parts where direct access to the coating area is available. The F4MBXL platform is rated for operation at power levels up to 55 kW at 100% duty cycle.
Powder is introduced externally into the plasma jet. Different injector holders, injector diameters and injection positions can be selected according to powder characteristics and coating process requirements. The gun can operate with combinations of plasma gases including argon, hydrogen and helium, while nitrogen-based configurations can be used with suitable hardware.
The GST F4MBXL is suitable for both new thermal spray installations and modernization of existing F4-based systems. The F4MBXL series is designed to support replacement of earlier F4 configurations while retaining established process concepts and key consumable formats, subject to the selected configuration.
Key benefits
- Up to 55 kW power capability for demanding atmospheric plasma spray applications and continuous industrial operation.
- Wide coating material range, including metals, alloys, ceramics, carbides, cermets, abradables, composites and blended powders.
- Machine-mounted design suitable for integration with industrial robots, manipulators and automated coating cells.
- Flexible external powder injection with different injector diameters, positions and injection angles for process optimization.
- Multiple nozzle configurations allow the gun hardware to be adapted to different plasma parameters and coating materials.
- F4 platform compatibility simplifies modernization of existing F4 installations.
- Service-friendly design with replaceable electrodes, nozzles, injectors, injector holders, O-rings and dedicated maintenance tools.
- Water-cooled gun construction supports stable operation at high plasma power levels.
Optional Accessories and Consumables
The GST F4MBXL Plasma Gun can be configured with a range of interchangeable components and maintenance accessories according to the coating material and process requirements.
- Powder injectors
- Injector holders
- Electrodes
- Plasma nozzles
- Electrode centering tool
- Injector distance gauge
- Gun mounting fixtures
- Air cooling / air jet accessories
- Replacement seals and O-rings
Available GST configurations include multiple injector-holder geometries, 1.5 / 1.8 / 2.0 mm powder injectors and 5 / 6 / 7 / 8 mm plasma nozzles for the F4 platform.
| No. | Article | Name | OEM Article No. | OEM Article No. |
|---|---|---|---|---|
| 1 | ST1069418 | Rear Gun Body Assembly | 1069418 | - |
| 2 | ST1069416 | Center Gun Body | 1069416 | - |
| 3 | ST1003421 | Front Gun Body | 1003421 | - |
| 4 | ST1003425 | Rear Locking Ring | 1003425 | - |
| 5 | ST1003419 | Front Locking Ring | 1003419 | 300.035 |
| 6 | ST1003430 | Injector Holder, Double, 90°/75° | 1003430 | 300.037-1 |
| 6 | GST-100008 | Injector Holder, Double, 90°/90° | - | - |
| 6 | ST1003478 | Injector Holder, Double, 90°/105° | 1003478 | - |
| 6 | ST1006700 | Injector Holder, Double, 90°/100° | 1006700 | - |
| 6 | ST1003479 | Injector Holder, Double, 100°/100° | 1003479 | - |
| 6 | ST1003481 | Injector Holder, Double, 100°/105° | 1003481 | - |
| 6 | ST1003480 | Injector Holder, Double, 105°/105° | 1003480 | - |
| 6 | ST1008686 | Injector Holder, Double, 105°/75° | 1008686 | - |
| 6 | ST1003432 | Injector Holder, Double, 75°/75° | 1003432 | - |
| 6 | ST1003443 | Injector Holder, 4 x 90° | 1003443 | - |
| 6 | ST1003444 | Injector Holder, 105° / 75° / 105° / 75° | 1003444 | - |
| 6 | ST1003445 | Injector Holder, 75° / 90°/ 75° / 90° | 1003445 | - |
| 6 | ST1008656 | Injector Holder, 90° / 75° / 90° / 105° | 1008656 | - |
| 6 | ST1003446 | Injector Holder, 105° / 90° / 105° / 90° | 1003446 | - |
| 6 | ST1008657 | Injector Holder, 105° / 90° / 90° / 75° | 1008657 | - |
| 7 | ST1003497 | Insulator Assembly | 1003497 | 300.015 |
| 8 | ST1003499 | Gas Ring | 1003499 | 300.018 |
| 9 | Cooling tube | 1003423 | 300.006 | |
| 10 | ST1003512 | Insulating screw | 1003512 | 300.010 |
| 11 | GST-100025 | Insulator threaded bushing | - | - |
| 12 | ST1069419 | Cover Assembly | 1069419 | - |
| 13 | GST-100054 | Protective cover part 1 | - | - |
| 14 | GST-100055 | Protective cover part 2 | - | - |
| 15 | GST-100037 | O-Ring | - | - |
| 16 | ST1038940 | O-Ring | 1038940 | 300.061 |
| 17 | GST-100039 | O-Ring | - | - |
| 18 | GST-100040 | O-Ring | - | - |
| 19 | ST1000359 | O-Ring | 1000359 | 300.007 |
| 20 | ST1001434 | O-Ring | 1001434 | 300.005 |
| 21 | Fitting pipe | - | - | |
| 22 | GST-100035 | Screw | - | - |
| 23 | GST-100043 | Screw | - | - |
| 24 | GST-100023 | Screw | - | - |
| 25 | GST-100089 | Screw | - | - |
| 26 | GST-100056 | Screw | - | - |
| 27 | GST-100003 | Screw | - | - |
| 28 | GST-100021 | Screw | - | - |
| 29 | Fusion nut | - | - | |
| 30 | GST-100031 | Nut | - | - |
| 31 | GST-100059 | Washer | - | - |
| 32 | ST1072006 | Electrode WLa | 1072006 | 300.008 |
| 32 | ST1072006 | Electrode WCe | 1072006 | - |
| 32 | ST1072006 | Electrode WTh | 1072006 | - |
| 33 | ST1003436 | Powder Injector, 1.8 mm (with undercut),standard | 1038715 | - |
| 33 | ST1003434 | Powder Injector, 1.5 mm / (with undercut),standard | 1038714 | - |
| 33 | ST1003439 | Powder Injector, 2.0mm / (with undercut),standard | 1038716 | - |
| 34 | ST1003442 | Nozzle, 5mm | 1003442 | - |
| 34 | ST1072007 | Nozzle, 6mm | 1072007 | - |
| 34 | ST1003407 | Nozzle, 7mm | 300002-10/1003407 | 300.029 |
| 34 | ST1003408 | Nozzle, 8mm | 300002-20/1003408 | 300.031 |
| 35 | GST-100048 | Powder hose fitting | - | - |
| 36 | GST-100057 | Blind plug | - | - |
Applications
The GST F4MBXL Plasma Gun can be used for a wide range of industrial coating applications, including:
- Wear-resistant coatings for shafts, sleeves, rolls and machine components.
- Thermal barrier coatings for components operating at elevated temperatures.
- Ceramic coatings for thermal and electrical insulation.
- Corrosion-resistant coatings for industrial components.
- Abradable coatings for turbomachinery applications.
- Bond coats and multilayer coating systems.
- Dimensional restoration of worn or undersized parts.
- Functional coatings based on metals, alloys, ceramics and cermets.
FAQ
What is the GST F4MBXL Plasma Gun used for?
The GST F4MBXL is designed for atmospheric plasma spraying of functional and protective coatings. Typical applications include wear-resistant, thermal barrier, corrosion-resistant, ceramic, abradable and dimensional-restoration coatings.
What materials can be sprayed with the F4MBXL?
The gun can process a wide range of powder materials, including metallic alloys, oxide ceramics, carbides, cermets, composites, abradables and blended powders.
What is the maximum power of the F4MBXL Plasma Gun?
The F4MBXL platform is designed for operation at power levels up to 55 kW at 100% duty cycle.
Which plasma gases can be used?
Typical plasma gas configurations use argon, hydrogen and helium. Nitrogen and nitrogen-hydrogen configurations can also be used with appropriate gun hardware.
Is the F4MBXL suitable for robotic plasma spraying?
Yes. The F4MBXL is a machine-mounted plasma spray gun and can be integrated into robotic coating cells, manipulators and automated thermal spray systems.
How is powder fed into the plasma jet?
The F4MBXL uses external powder injection. Different powder injector sizes, positions and injection angles can be selected according to the powder and coating process.
Can the F4MBXL replace an older F4-MB plasma gun?
The F4MBXL series is intended to support replacement of earlier F4-MB / F4-HB / F4-HBS configurations. Final compatibility should be confirmed for the specific hardware and process configuration.
Can the F4MBXL be used for internal surfaces?
The straight F4MBXL is primarily optimized for surfaces with direct spray access. Some internal surfaces can be processed where sufficient clearance is available. For restricted internal diameters or geometries, a 90° gun configuration such as the F4MBXL-90 may be more suitable.
How do I select the correct nozzle and powder injector?
The nozzle diameter, injector diameter, injector position and plasma gas configuration depend on the coating material, particle size, required spray rate and coating properties. GST can select the appropriate configuration based on the customer application and powder specification.
|
Spray configuration
|
Straight / 180° |
|
Duty cycle at rated power
|
100% |
|
Gun type
|
Machine-mounted plasma spray gun |
|
Maximum power
|
55 kW |
|
Powder feed
|
External powder injection |
|
Nozzle diameter
|
5 / 6 / 7 / 8 mm |
|
Cooling medium
|
Water |
|
Powder injector diameter
|
1.5 / 1.8 / 2.0 mm |
|
Cooling water inlet temperature
|
15-25 °C |
|
Cooling water pressure
|
13.5 bar |
|
Cooling water conductivity
|
Max. 5 µS |
|
Cooling water flow
|
10-14 l/min |
|
Typical deposition efficiency
|
50-80% |
|
Typical powder spray rate
|
40-80 g/min |
|
Coating materials
|
Metals, metallic alloys, oxide ceramics, carbides, cermets, composites, blends and abradables |
|
Gun weight
|
Approx. 2.5 kg |
|
Powder injection arrangement
|
Configurable external injectors and injector holders |
|
Installation
|
Automated / robotic / machine-mounted thermal spray systems |
|
Legacy platform compatibility
|
F4-MB / F4-HB / F4-HBS platform depending on configuration |
|
Process
|
Atmospheric Plasma Spray (APS) |
|
Plasma gases
|
Argon (Ar), Hydrogen (H2), Helium (He); nitrogen-based configurations with suitable hardware |
To purchase a product you like, you need to order it. There are several scenarios for how this can be done.
Choose the product you like and click the "Book now" button. When placing an order, fill out the form. Enter information in the fields: full name, phone number and e-mail. Then the manager will send you e-mail to confirm your consent to make the purchase.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We work with legal entities. And we provide few payment options.
We work on Standard purchasing Contract basis. Payment type depends on product and final customer country/address.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We can deliver your ordered goods with recommended logistic companies on EXW/DDP basis. Delivery time depends on final customer country/address. Terms and conditions can be found in invoice/offer.
Ready to delivery lead time is longer for customized equipment/systems.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.


