The GST Sinplex-90 Plasma Gun is a machine-mounted atmospheric plasma spray (APS) gun based on cascaded-arc technology. The 90° connection layout supports compact installation in robotic coating cells and automated manipulators, while the stabilized arc design helps maintain repeatable plasma conditions over a broad operating window.
The GST Sinplex-90 Plasma Gun is a machine-mounted atmospheric plasma spray (APS) gun based on cascaded-arc technology. The 90° connection layout supports compact installation in robotic coating cells and automated manipulators, while the stabilized arc design helps maintain repeatable plasma conditions over a broad operating window.
Unlike a conventional short-arc plasma gun, the Sinplex architecture uses a stack of electrically neutral rings (neutrodes) to establish a longer, controlled arc path. This allows higher-voltage, lower-current operation and reduces arc-voltage fluctuation, supporting stable energy transfer to the plasma gas and consistent coating production.
The gun is rated up to 60 kW and can operate with argon, helium, nitrogen and hydrogen in validated process combinations. It is suitable for a broad range of thermal spray powders, including metallic alloys, oxide ceramics, carbides, cermets, composites, abradables and blended materials.
GST supplies Sinplex-90 process hardware and service components, including nozzle assemblies, powder injectors, injector rings, electrode and neutrode components, seals and gun-body parts. The gun can be integrated into new GST plasma spray systems or used for modernization of compatible existing APS installations.
Key benefits
- Cascaded-arc design provides a stable plasma arc across a wide range of gas flows, gas mixtures and operating pressures.
- Up to 60 kW power capability for industrial atmospheric plasma spray applications.
- Machine-mounted 90° configuration is well suited to robotic coating cells and compact automated installations.
- Broad material capability covering metals, alloys, ceramics, carbides, cermets, composites, abradables and blends.
- Compatible with argon, helium, nitrogen and hydrogen process gases in validated parameter sets.
- Two powder ports with selectable radial injection positions support process optimization for different powders and plume conditions.
- Available nozzle assemblies and injector sizes allow the gun configuration to be matched to the coating process.
- Cascaded-arc technology can increase throughput and improve process repeatability compared with conventional unstabilized plasma guns.
Optional Accessories and Consumables
The GST Sinplex-90 can be configured and serviced with interchangeable process hardware and replacement components selected for the required powder, plasma gases and operating parameters.
- 6.5 / 8 / 9 mm nozzle assemblies
- 1.5 / 1.8 / 2.0 mm powder injectors
- Short and long injector rings
- Neutrode stack assembly
- Electrode and electrode holder
- Front and rear gun-body components
- Ignition components and plasma-gas fittings
- Cooling-water tube and hose fittings
- Replacement O-rings, seals, screws and washers
- Gun mounting and robotic integration hardware
| No. | Article | Name | OEM Article No. |
|---|---|---|---|
| 1 | ST1060231 | Nozzle Nut | 1060231 |
| 2 | ST1080091 | Short Injector Ring | 1080091 |
| 2 | ST1079906 | Long Injector Ring | 1079906 |
| 3 | ST1003436 | Powder Injector 1.8 | 1003436 |
| 3 | ST1003439 | Powder Injector 2.0 | 1003439 |
| 3 | ST103434 | Powder Injector 1.5 | 103434 |
| 4 | ST1082606 | Nozzle Assembly, 9 mm (includes items 5 & 6) | 1082606 |
| 4 | ST1082605 | Nozzle Assembly, 6.5 mm (includes items 5 & 6) | 1082605 |
| 4 | ST1302081 | Nozzle Assembly, 8 mm (includes items 5 & 6) | 1302081 |
| 5 | ST1081770 | Insulator Ring | 1081770 |
| 6 | ST1061036 | O-ring, (Quad Ring) 0.801 X 0.070 | 1061036 |
| 7 | ST1079905 | Front Gun Body Assembly (includes item 8) | 1079905 |
| 8 | ST1000103 | Water (NOZ +) Hose Fitting | 1000103 |
| 9 | ST1079904 | Neutrode Stack Assembly | 1079904 |
| 10 | ST1059685 | O-ring, 1.614 x 0.070 Black Viton | 1059685 |
| 11 | ST1000366 | O-ring, 2.364 x 0.070 Viton | 1000366 |
| 12 | ST1079909 | Electrode Insulator | 1079909 |
| 13 | ST1079897 | Electrode | 1079897 |
| 14 | ST1001462 | O-Ring, Black Viton 0.614 x 0.07 in. (pkg. of 6) | 1001462 |
| 15 | ST1017527 | O-Ring, Buna 0.734 x 0.139 in. | 1017527 |
| 16 | ST1079907 | Rear Gun Body | 1079907 |
| 17 | ST1003423 | Cooling Water Tube | 1003423 |
| 18 | ST1015536 | O-Ring, Black Viton 0.864 x 0.07 in. | 1015536 |
| 19 | ST1001624 | O-Ring, Buna 0.926 x 0.07 in. (pkg. of 3) | 1001624 |
| 20 | ST1000225 | O-Ring, Black Viton 0.989 x 0.07 in. (pkg. of 2) | 1000225 |
| 21 | ST1079908 | Electrode Holder | 1079908 |
| 22 | ST1089684 | Screw, M5 x 20 mm (2 pcs.) | 1089684 |
| 23 | ST1059687 | Screw, M6 x 70mm (4 pcs.) | 1059687 |
| 24 | ST1089683 | Lock Washer, M6 (4 pcs.) | 1089683 |
| 25 | ST1089682 | Flat Washer, M6 (4 pcs.) | 1089682 |
| 26 | ST1081771 | Hose Cover (includes item 27) | 1081771 |
| 27 | ST1081772 | Captive Screw (2 pcs.) | 1081772 |
| 28 | ST1079913 | Ignition Spring | 1079913 |
| 29 | ST1079911 | Ignition Fitting (includes items 30 & 31) | 1079911 |
| 30 | ST1015535 | O-Ring, Black Viton 0.301 x 0.07 in. (2 pcs.) | 1015535 |
| 31 | ST1000143 | O-Ring, Black Viton 0.676 x 0.07 in. (pkg. of 4) | 1000143 |
| 32 | ST1081773 | Ignition Insulator | 1081773 |
| 33 | ST1003513 | Screw, M4 x 10 (4 pcs.) | 1003513 |
| 34 | ST1079910 | Plasma Gas Fitting | 1079910 |
| 35 | ST1002073 | O-Ring, Black Viton, 0.344 x 0.07 in. (pkg. of 4) | 1002073 |
| 36 | ST1079912 | Ignition Pin | 1079912 |
Applications
The GST Sinplex-90 Plasma Gun is suitable for high-repeatability APS coating work, including:
Thermal barrier coatings for turbine and high-temperature components.
Wear-resistant and erosion-resistant ceramic or cermet coatings.
Corrosion- and oxidation-resistant metallic alloy coatings.
Abradable coatings for turbomachinery clearance-control systems.
Bond coats and multilayer coating systems.
MCrAlY and other high-temperature alloy coatings where APS is specified.
Automated production of ceramic functional coatings for thermal or electrical insulation.
Robotic coating of shafts, discs, turbine components and complex external surfaces.
FAQ
What is the GST Sinplex-90 Plasma Gun used for?
It is designed for Atmospheric Plasma Spray coating in automated and robotic systems. Typical applications include thermal barrier, wear-resistant, corrosion-resistant, abradable, ceramic and metallic coatings.
What is cascaded-arc plasma technology?
A cascaded-arc gun uses electrically neutral rings to control and extend the arc path inside the gun. This stabilizes the plasma arc and reduces large voltage fluctuations compared with conventional unstabilized plasma-gun designs.
What is the maximum power of the Sinplex-90?
The Sinplex platform is rated for operation up to 60 kW at 100% duty cycle.
Which plasma gases can be used?
Validated configurations can use argon, helium, nitrogen and hydrogen. The exact gas combination depends on the powder and required coating properties.
Which powder injectors and nozzles are available from GST?
GST lists 1.5, 1.8 and 2.0 mm powder injectors and 6.5, 8 and 9 mm nozzle assemblies for the Sinplex-90 platform.
Can the Sinplex platform spray ceramic powders?
Yes. Cascaded-arc Sinplex guns are designed to process a wide range of thermal spray powders, including oxide ceramics as well as metallic alloys, carbides, cermets, composites and abradables.
Can Sinplex be retrofitted to an existing plasma spray system?
The SinplexPro platform is designed for retrofit use on many existing plasma spray systems. Compatibility of the power supply, controller, cooling unit, gas system and exhaust should be checked before conversion.
How should the correct hardware configuration be selected?
Nozzle size, injector size, injection angle, gas composition and power parameters should be selected according to the powder specification, required coating properties and validated spray procedure. GST can prepare the configuration for a specific application.
|
Gun type
|
Machine-mounted cascaded-arc plasma spray gun |
|
Maximum power
|
60 kW at 100% duty cycle |
|
Cooling medium
|
Water |
|
Gun weight
|
Approx. 2.5-2.6 kg without hoses/cables |
|
Installation
|
Automated / robotic / machine-mounted APS systems |
|
Controller compatibility
|
GST MP 3000 and compatible plasma spray controllers; retrofit suitability to be confirmed for the installed system |
|
Process gases
|
Argon (Ar), Helium (He), Nitrogen (N2), Hydrogen (H2) |
|
Powder ports
|
2 |
|
Radial powder-injection detents
|
3 |
|
Cooling-water inlet temperature
|
10-25 °C |
|
Radial injection angles
|
0° / 45° / 90° |
|
Cooling-water inlet pressure
|
13.8-17 bar |
|
Cooling-water flow
|
Approx. 17.5-27 l/min, depending on operating condition |
|
Cooling-water conductivity
|
Max. 5 µS |
|
Maximum voltage
|
132 V |
|
GST configuration
|
Sinplex-90 / 90° connection layout |
|
GST powder injectors
|
1.5 / 1.8 / 2.0 mm |
|
GST nozzle assemblies
|
6.5 / 8 / 9 mm |
|
Process
|
Atmospheric Plasma Spray (APS) |
To purchase a product you like, you need to order it. There are several scenarios for how this can be done.
Choose the product you like and click the "Book now" button. When placing an order, fill out the form. Enter information in the fields: full name, phone number and e-mail. Then the manager will send you e-mail to confirm your consent to make the purchase.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We work with legal entities. And we provide few payment options.
We work on Standard purchasing Contract basis. Payment type depends on product and final customer country/address.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.
We can deliver your ordered goods with recommended logistic companies on EXW/DDP basis. Delivery time depends on final customer country/address. Terms and conditions can be found in invoice/offer.
Ready to delivery lead time is longer for customized equipment/systems.
If you have any questions related to the product select the product you like and click the "Ask a question" button. Then fill out the form with contact information and send an application. The manager will contact you for further discussion.


