The GST SG-100 Plasma Gun is a high-power machine-mounted plasma spray gun designed for Atmospheric Plasma Spray (APS) applications. Rated by GST for operation at power levels up to 80 kW, the SG-100 is suitable for high-volume production as well as flexible coating cells where different materials, powder-feed arrangements and spray conditions are required.
The GST F1-90 Plasma Gun is a machine-mounted Atmospheric Plasma Spray (APS) gun developed for coating internal surfaces. The gun directs the plasma jet at 90° to the gun body axis, providing a radial spray pattern that is particularly suitable for cylindrical bores, sleeves, housings and other internal surfaces.
The GST F1-45 Plasma Gun is a machine-mounted Atmospheric Plasma Spray (APS) gun designed specifically for coating internal surfaces. Its compact gun head and 45° plasma jet orientation allow the spray stream to reach internal areas where a conventional straight plasma gun cannot maintain the required spray angle or stand-off distance.
GST F4MB90-XL model is the most common and versatile plasma gun used to process the surfaces of components by applying various types of coatings, such as hardening coatings, anti-corrosion coatings, wear-resistant coatings, heat-resistant coatings, etc. Coating type depends on the material being sprayed. Metal powders, ceramic powders, cobalt-based alloy powders, carbide powders, etc. can be used.
The GST F4MBXL Plasma Gun is a versatile machine-mounted plasma spray gun designed for Atmospheric Plasma Spray (APS) applications. It is intended for industrial coating processes requiring stable operation, repeatable spray parameters and integration into automated or robotic thermal spray systems.
The GST 3MB Plasma Gun is a proven conventional plasma spray gun for Atmospheric Plasma Spray (APS) applications. Its compact design, straightforward maintenance and broad process capability make the 3MB suitable for general-purpose production, repair and advanced coating work. The platform is available as the machine-mounted 3MBM for automated systems and as the handheld 3MBH for manual spraying.
The GST Sinplex-90 Plasma Gun is a machine-mounted atmospheric plasma spray (APS) gun based on cascaded-arc technology. The 90° connection layout supports compact installation in robotic coating cells and automated manipulators, while the stabilized arc design helps maintain repeatable plasma conditions over a broad operating window.
The GST JP5000 HVOF Spray Gun is a machine-mounted liquid-fuel High-Velocity Oxygen Fuel (HVOF) torch designed for high-rate deposition of dense carbide, cermet, metal and alloy coatings. The JP5000 architecture uses kerosene and oxygen to generate a high-pressure combustion jet and is widely used for demanding wear, corrosion and dimensional-restoration applications.
The GST DJ-2600 HVOF Spray Gun is a machine-mounted gas-fuel High-Velocity Oxygen Fuel (HVOF) torch designed for dense, high-integrity coatings from metals, alloys, superalloys, carbides and cermets. The gun is intended for industrial coating processes where high particle velocity, low oxide pickup and repeatable coating quality are required.
The GST F4VB-VPS Plasma Gun is a robust machine-mounted plasma spray gun designed for controlled-atmosphere coating processes, including Vacuum Plasma Spray (VPS) and Low Pressure Plasma Spray (LPPS). It is intended for installation inside a vacuum or controlled-atmosphere chamber where the process environment can be adjusted to reduce interaction between the molten spray material and ambient air.
The GST TriCone-90 Plasma Gun is an advanced machine-mounted Atmospheric Plasma Spray (APS) gun that combines a cascaded-arc chamber with three cathodes and divided arc current. The design is intended for applications that require high process stability, efficient heating of the plasma gas and repeatable coating quality over long production runs.
The GST Et-Gun Ethanol HVOF Spray Gun is a high-pressure liquid-fuel High-Velocity Oxygen Fuel (HVOF-LF) torch engineered for industrial deposition of dense carbide, cermet, metal and alloy coatings. The gun uses ethanol and oxygen to generate a high-energy combustion jet and is designed for applications requiring high particle velocity, low coating porosity and repeatable coating performance.
The GST DJ2700M is an industrial gas-fuel High-Velocity Oxygen Fuel (HVOF) spray gun for applying powder coatings. It is designed for stable operation and straightforward maintenance and can be used as a handheld gun or installed on mechanized and robotic motion systems. In the GST MP3M-GF configuration, LPG/propane is used as the fuel gas.
The GST EGD-K Wire Flame Spray Gun is a heavy-duty, machine-mounted combustion wire spray gun developed for automated, high-volume industrial coating. It is intended for production environments where stable wire feeding, repeatable spray parameters and long continuous operating cycles are required.
The GST 5K Wire Flame Spray Gun is a robust machine-mounted combustion wire spray gun designed for automated, high-volume industrial production. Its motorized wire-feed system delivers stable material feeding over a wide operating range, making the gun suitable for both short production runs and continuous coating of large batches.
Thermal spray guns are the process heads that convert electrical or combustion energy into the heat and gas flow required to deposit coating material on a prepared surface. GST supplies thermal spray gun and torch solutions for plasma spraying, HVOF and flame wire spraying, covering industrial coating tasks from wear resistance to corrosion protection.
Gun selection defines the thermal spray process, available material range, spray rate and integration requirements. The correct model must match the coating specification, power or fuel source, powder feeder or wire feed unit, cooling circuit, component geometry and the level of automation used in the spray equipment.

Plasma Spray Guns
A plasma spray gun uses an electric arc between cathode and anode to create a high-energy plasma jet. Powder is injected into the jet, heated and accelerated toward the substrate. Power level, electrode design and cooling define the usable process window.
Single-cathode torches provide a proven architecture for many plasma spray systems. Multi-cathode designs use several electrodes to improve arc stability and manage thermal load in automated equipment.
HVOF and Combustion Guns
An HVOF spray gun burns fuel with oxygen in a combustion chamber and accelerates gas through a nozzle. Gas-fuel and liquid-fuel torches create different heat and velocity conditions, so selection depends on feedstock and coating requirements.
A flame spray gun for wire feed melts wire with an oxygen-fuel flame and atomizes it with compressed air. Arc spray gun applications use two wires melted by an electric arc and are covered in the Arc Spray Systems category.
How to Choose a Spray Gun
Choose a thermal spray gun first by process and coating material, then by required productivity and component geometry. Plasma is suited to ceramic and metal materials; HVOF is widely used for dense carbide and alloy coatings; flame wire is practical for zinc, metallic build-up and corrosion protection.
Access is equally important. Straight, angled or compact torch arrangements may be required for bores, recesses and internal surfaces, while automated production must consider gun mass, hose routing, stand-off distance, spray rate and robot or manipulator motion.
Compatibility and Spare Parts
A spray gun must match the complete system. Plasma torches must suit the power supply and control unit; combustion guns must suit the gas or fuel modules. The configuration must also match the powder feeder or wire feed unit and cooling system.
Service requires the correct spare parts and consumables. Nozzles, electrodes, insulators, seals and other wear items must match the exact gun version. GST can supply spare parts and support maintenance planning.
Delivery and Support
GST supports gun selection for new systems and existing installations, including compatibility review, commissioning and operator training. The final configuration is matched to the customer's coating process, equipment interfaces, application and service requirements.

